top of page



Whether you have water damage to your home or commercial space or suspect elevated levels of humidity may be breeding mold, Phoenix One Restoration will be there to not only test for elevated levels of mold but complete the mold remediation process and bring safety back to your home or commercial space. We service all of Metro Atlanta & North Georgia with Mold Testing services and will work with your insurance company to ensure that your Mold Testing experience is quick, accurate, convenient, and stress-free.

Mold is everywhere and can grow on virtually any substance as long as oxygen and moisture are present. Often after you conduct mold testing, a simple mold removal process is often not enough to solve mold problems in your home unless the infected area is small and well contained. It is important to note that many types of mold spores are generally harmless until they settle on a damp area and begin to grow and reproduce into active mold. If you don’t get out in front of the problem, mold can quickly reproduce and spread through the air in your HVAC system to other areas of your house where moisture is present and cause great risk to not only your property but also present a serious health hazard


When you suspect Mold in your home or commercial space in Atlanta Georgia, call the trusted experts at Phoenix One Restoration. Mold, mildew, bacteria, and other pathogens can begin growing in as little as 24 hours and will continue growing throughout your home or commercial space until the remediation process is completed. Our certified technicians are IICRC certified and will be on location and begin assessment and mitigation steps in under one hour guaranteed.

How do I know if I have mold in my home or business?

Not all mold is bad, but not all mold is visible as well so its extremely important to contact certified mold experts if you suspect mold or notice elevated levels of humidity or moisture in your home or business. While certain concentrations and genres of mold aren't always dangerous, mold can cause structural damage to your home and negatively impact your health when left undetected. 

Have you had any water damage to your home or business? Noticed elevated levels of moisture in your attic, crawlspace, or basement? Noticed a leaky faucet, toilet, HVAC, or shower spout in your bathroom? Call the mold experts at Phoenix One Restoration for all your emergency plumbing, water damage remediation, mold testing, and mold remediation needs now! 

Mold Remediation VS Mold Removal:

There are many terms to classify the process of mold remediation - often called mold removal, mold abatement, and mold mitigation - which often is understood to mean to get rid of or treat mold problems in your home or business. The difference between these processes is addressing core root of the problem, eliminating mold. Often the mold removal process is ineffective because it doesn't involve identifying and rectifying the source cause of the mold so that the mold does not come back. 

It's important to note that no federal limits have been set by the EPA or other agencies for standards or Threshold Limit Values (TLVs) for airborne concentrations of mold, or mold spores. 

Mold Removal

A simple mold removal process is never enough to solve mold problems in your home, unless the infected area is too small. However, for larger areas that are significantly affected by mold, a complete mold remediation process needs to be carried out. Molds are a natural part of our ecosystem and cannot be eliminated completely, the key is to control their growth. For example, when there is a leak in your roof or in your plumbing pipes and you’re not able to address it immediately – the resultant moisture provides an ideal environment for the growth of active molds. In this situation, you will require the services of a professional mold remediation company like Phoenix One Restoration who can provide you with comprehensive and guaranteed solutions.

Mold Remediation

Mold Remediation, in simple terms, is the process involved in eliminating harmful mold growth. We use a combination of methods and equipment to reduce any harmful mold levels down to acceptable levels set by the IAC. Our typical mold remediation process involves antimicrobial application, source identification, containment, air filtration & drying, removal & cleanup, and replacement & reconstruction. Phoenix One Restoration's mold remediation procedure is unique to each mold growth scenario, our expert technicians will diagnose the severity of your mold problem with a free estimate then provide you with detailed steps to restore your home and belongings back to safety so you can feel confident and safe in your space once again.

Residential Housing Complex

Have a Mold Problem?

Get a free quote from a licensed IICRC-certified restoration expert near you.

Our Mold Remediation Process

Our sample analysis follows analytical methods recommended by the American Industrial Hygiene Association(AIHA) & the American Conference of Governmental Industrial Hygienists(ACGIH). All of our antimicrobial applications and other solutions used in our remediation process are all approved by the Federal Insecticide Fungicide and Rodenticide Act(FIFRA) set by the EPA to ensure safety. After we conduct our initial inspection, we will perform further sample & air quality testing to identify not only the source of your mold infestation, but the cause as well. Safety is our #1 priority 

Phoenix One Restoration's Mold Remediation System consists of several botanical based, EPA registered, antimicrobial products proven to kill 99.9% of mold in 15 minutes. We use Bioesque which is a plant based 100% safe, natural, and chemical free antimicrobial application. Unlike conventional unbound antimicrobials, Bisque does not migrate, volatilize or otherwise leave the surface to which it has been applied. We are proud to use only non-toxic, plant-based, odorless antimicrobials that will continue to subdue mold growth on the applied surfaces long after application to keep you, your family, and your business safe.

Antimicrobial Application

Screen Shot 2022-02-24 at 12.35.31 PM.jpg

Source Identification

Our IICRC certified technicians use non-invasive testing and observation to pinpoint the water source that is causing your mold infestation. Phoenix One Restoration uses a combination of thermography and moisture meter readings to measure microbial growth levels that you have on your property. Quickly identifying the source of your water damage or mold infestation is extremely important because as soon as mold develops it becomes Category 3, or black water, which is the most hazardous level of water damage for you and your family. Read more about the dangers of water damage here.

Screen Shot 2022-02-24 at 12.34.10 PM.jpg


One of the biggest concerns when mold is present is the dissemination of molds in air. Microscopic mold spores will not grow if moisture is not present. The act of removing or disturbing them on surfaces or in air tends to distribute large quantities of mold spores into the air. As a result, this can be extremely hazardous and unhealthy for those around the affected area. Containment helps to control the spread of the spores to unaffected areas by controlling airflow within your residence or commercial structure. Phoenix One Restoration utilizes polyethylene sheeting to create containment by forming walls, floors and ceilings around an infested space using commercial grade duct tape and negative pressure with HEPA filtered fans and air scrubbers. This method omits any possible mold contamination which could occur without proper protection during remediation activity. Using this procedure minimizes the migration of insects, rodents, dust and other pollutants into an unaffected area during remediation activity, thus preventing cross contamination. Our professional techs are highly trained in proper application procedures required by the IICRC (Institute Of Inspection Cleaning And Restoration Certification) guidelines using specific materials set forth in these guidelines.


Air Filtration & Drying

During the mold removal process, spores can be disturbed and become airborne. Running a combination of our air scrubbers and negative air machines with high efficiency particulate air (HEPA) filters continuously throughout the project ensures that all mold spores, dust, microbial volatile organic compounds (MVOCs), and other airborne debris are removed from the affected area. We also work to reduce odors by absorbing organic vapors through carbon filters. The combination of our scrubbers and containment chamber we install around the work site stop any possible spread of mold to unaffected areas. 

Screen Shot 2022-02-24 at 1.22.41 PM.png

Removal & Cleanup

Often, thinly way to ensure a proper remediation process is to remove any affected materials completely from the affected space. This can involve removing drywall, insulation, wood trim, carpet and other flooring, and even your furniture. We abide by strict S520 guidelines set by the IICRC to ensure your space is meticulously cleaned so it can be restored to its pre-loss condition and your family or colleagues will have peace of mind when returning. We offer full contents removal and sanitation services needed in order to restore your furniture and belongings back to a safe state. 

Screen Shot 2022-02-24 at 12.23.29 PM.jpg


Our team of highly skilled technicians and craftsmen will work diligently to repair any necessary areas affected by the mold remediation process. This can include drywall, molding & trim repair, and even flooring replacement. We guarantee to restore your home back to its pre-loss state in a fast, safe, and efficient manner or your money back!

There is only one company you should trust to handle any mold remediation job in Atlanta. Phoenix One Restoration is IICRC certified and insured to take on all residential and commercial mold testing and remediation jobs in Atlanta and the surrounding North Georgia areas. With over 30 years of experience, Phoenix One Restoration will remove any harmful mold or pathogen growth or your money back. Call now and get FREE post-remediation mold testing with any remediation job!

1 Glenlake Pkwy NE Suite 650 & 700, Atlanta, GA 30328

Our Sandy Springs office is located just off 400 & Abernathy Road NE. Ready and able to respond to any of your disaster needs.







bottom of page